The combination unit is ideally suited for multiple stage fracturing where one fracturing crew performs several fractures in a single day. Compared to conventional fracturing setups, the combo unit provides significant savings through increased efficiency of equipment utilization and all related completion services. The unit leaves a small environmental footprint and no fluid waste.

• Quintiplex fluid pump
• Up to 4.25 m³/min (27 bpm)
• 2000 Series Detroit 1500 hp V-16
• Allison 9800 series 7-speed transmission
• Stewart and Stevenson automatic control of sand and chemical additives
• Side sand auger for B-train unloading
• Includes flow line equipment
• Ideally suited for multiple treatments per day

Trican’s data vans make it possible for engineers to monitor a job as it is being pumped, in real-time. With satellite, cellular and fax communications systems, mini-frac analysis, a gel testing lab and real-time frac modelling software, all job data can be analyzed on location or transmitted either to Trican’s office or our customer’s office as the job occurs via a satellite link. The van utilizes an integrated control system that links all equipment on site.

• Satellite, cellular and fax communication systems
• Real-time frac modelling software
• Quality assurance/quality control lab
• Data van with state-of-the-art remote control stations for up to 24 frac pumps, 2 blenders and 2 liquid additive units simultaneously
• Multiple, highly customizable customer displays and analysis capabilities
• Minifrac analysis software
• Shore-based and onboard power access

BLENDERS
Blenders are used for mixing or blending powders, chemicals and liquids to create the required treating fluid on-the-fly.

• Proppant concentration to 2,000 kg/m³ (17 ppg)
• Up to 11 m³/min (up to 70 bpm) fluid rate
• 9,000 kg/min (20,000 lbs/min) proppant rate through 2 x 305 mm (12”) augers
• Nuclear density measurement (Texas Nuclear)
• Turbine and magnetic flow meters for clean and slurry flow rates
• Remote control and monitoring of the additive rates/concentrations and proppant proportioning
• Integrated control with Data Van and Chemical Van
• Climate Controlled Operator Cab

• Proppant concentration to 2,000 kg/m³ (17 ppg)
• 16 m³/min (100 bpm) fluid rate
• 10,000 kg/min (22,000 lb/min) proppant rate through 2 x 355 mm (14”) augers
• Nuclear density measurement (Texas Nuclear)
• Remote control and monitoring of the additive rates/concentrations and proppant proportioning
• Integrated control with Data Van and Chemical Van

• 20 m³/min (130 bpm) slurry rate capacity
• 9,000 kg/min (20,000 lb/min) sand rate capacity
• 5 liquid additive pumps
• 2 dry additive feeders
• Nuclear density measurement (Texas Nuclear)
• Remote control monitoring and recording of the additive rates/concentrations and sand proportioning

• Proppant concentration to 2,000 kg/m³ (17 ppg)
• 11 m³/min (70 bpm) fluid rate
• 9,000 kg/min (20,000 lb/min) proppant rate through 2 x 305 mm (12”) augers
• Capable of carrying 6 totes of liquid chemicals
• 6 pumps for liquid additives
• 6 chemical mass flow meters
• Fully enclosed, heated storage space
• Nuclear density measurement (Texas Nuclear)
• Remote control and monitoring of the additive rates/concentrations and proppant proportioning

• Minimum Rate – 2 m³/min @ 6 kg/m³ (15 bpm @ 50 lb/1,000 gal)
• Maximum Rate - 16 m³/min @ 6 kg/m³ (100 bpm @ 50 lb/1,000 gal)
• 400 - 600 hp Cummins M-11 or QSX-15
• 7 Hours operating time at 100% load
• 1,000 kg (2,000 lb) on board storage
• 8 m³ to 36 m³ (50 bbl to 230 bbl) on board hydration
• Through tank and direct fluid hydration
• Fully Automated:
• Tank levelling
• Viscosity control
• Rate and loading control

PUMPING CAPACITY
Trican’s low profile frac pumper design was the first of its type in the world. These units utilize the most modern motors, transmissions, electronics, quintiplex and triplex pumps to ensure that reliability and job flexibility are never compromised. The units are easy to maintain, and are much more efficient than previously designed frac pumpers.

• Variety of triplex and quintiplex pumps capable of a range of rates and pressures
• Remote control of rates and pressures
• Arctic Climate Package - Diesel and hydraulic pre-heat for positive cold start ability
• Electronic over pressure control
• Global emergency kill systems

Chemical units are used for on-the-fly additive control and designed to meet treating fluid requirements.

• Capable of carrying up to 12 totes of liquid chemicals
• Full transfer capability of all chemicals
• Fully enclosed, heated storage space
• 5-8 pumps for liquid additives
• 5-8 chemical mass flow meters
• Automated control of 6-12 chemicals

Trican’s Hydration Units ensure gel fluid consistency in accordance with residence time, optimizing fluid performance.

• 5 mission centrifugal pumps, 2 of which are Mission Magnum Shear pumps, supporting specially designed impellers increasing the dispersion of gel into the fluid
• Tube type with 9 m³ (60 bbl) volume with stainless steel tubing construction, capable of 12 m³/min (75 bpm)
• Tank style with 16 m³ (100 bbl) baffled tank utilizing 4 front-to-back circulation weirs, capable of 12 m³/min (75 bpm)
• Tank style with 50 m³ (300 bbl) to provide an approximate 3 minute surface retention time at required rate, capable of 20 m³/min (125 bpm). Three of the 7 compartments have hydraulically driven agitators
• pH control, chemical injection
• The retention tank has automated or manual level control
• Minimal tank bottoms required

FLOW LINE

• High volume/high pressure suction and discharge manifold capable of handling rates as high as 16 m³/min (130 bpm) and pressures up to 104 MPa (15,000 psi)
• Light plants, utility crane, diesel generator, hydraulic controlled isolation valves are all contained in this one unit

PROPPANT STORAGE & TRANSPORT

Trican offers sand storage bins in two different sizes to help accommodate the variety of customer needs regarding job size and location size.

• Used on larger jobs with multiple Sand Bins and Blenders
• Dual Belt system provides redundancy in the event that one belt fails

FLUID HEATING

• Trailer-mounted, German-built hot oiler
• 1900 KW heating power
• 50 m³ (420 bbl) heated from 20°С (65°F) to 40°С (104°F) within 45 minutes (at ambient temperature of –25°С [13°F])
• Completely efficient, insulated, contained unit
• Completely electric unit (90 KW generator)
• Excess electric power can be utilized for backup power source for other units on siteE
• Low diesel consumption; clean burning
• Automated for ease of operator control
• Large 6,000 L (13 gal) fuel tank to maximize efficiency in remote locations

AUXILLIARY SERVICES

• Trican US caters breakfast and lunch to our employees and others on location each day we are pumping